dmesg - Intel Core i7-6500U
Linux version 4.15.0-29deepin-generic (pbuilder@zs-PC) (gcc version 7.3.0 (Debian 7.3.0-19)) #31 SMP Fri Jul 27 07:12:08 UTC 2018 (Ubuntu 4.15.0-29deepin.31-generic 4.15.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000084371fff] usable
BIOS-e820: [mem 0x0000000084372000-0x0000000084372fff] ACPI NVS
BIOS-e820: [mem 0x0000000084373000-0x000000008439cfff] reserved
BIOS-e820: [mem 0x000000008439d000-0x000000008b7aefff] usable
BIOS-e820: [mem 0x000000008b7af000-0x000000008c4b2fff] reserved
BIOS-e820: [mem 0x000000008c4b3000-0x000000008c4fffff] ACPI data
BIOS-e820: [mem 0x000000008c500000-0x000000008ce41fff] ACPI NVS
BIOS-e820: [mem 0x000000008ce42000-0x000000008d268fff] reserved
BIOS-e820: [mem 0x000000008d269000-0x000000008d2fefff] type 20
BIOS-e820: [mem 0x000000008d2ff000-0x000000008d2fffff] usable
BIOS-e820: [mem 0x000000008d300000-0x000000008d3fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x8d265118 ACPI=0x8c4ca000 ACPI 2.0=0x8c4ca000 SMBIOS=0x8a653010
secureboot: Secure boot could not be determined (mode 0)
SMBIOS 2.8 present.
DMI: HP HP Spectre x360 Convertible/81A1, BIOS F.46 06/01/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008E000000 mask 7FFE000000 uncachable
4 base 008D800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x8d300 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000008d265118 to 0x000000008d265150.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x1413f000, 0x1413ffff] PGTABLE
BRK [0x14140000, 0x14140fff] PGTABLE
BRK [0x14141000, 0x14141fff] PGTABLE
BRK [0x14142000, 0x14142fff] PGTABLE
BRK [0x14143000, 0x14143fff] PGTABLE
BRK [0x14144000, 0x14144fff] PGTABLE
BRK [0x14145000, 0x14145fff] PGTABLE
RAMDISK: [mem 0x327a2000-0x353c8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008C4CA000 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000008C4CA0A8 0000D4 (v01 HPQOEM SLIC-MPC 01072009 HP 00010013)
ACPI: FACP 0x000000008C4F6E00 00010C (v05 HPQOEM SLIC-MPC 01072009 HP 00010013)
ACPI: DSDT 0x000000008C4CA210 02CBE9 (v02 HPQOEM 81A1 01072009 ACPI 20120913)
ACPI: FACS 0x000000008CE3FF80 000040
ACPI: APIC 0x000000008C4F6F10 000084 (v03 HPQOEM 81A1 01072009 HP 00010013)
ACPI: FPDT 0x000000008C4F6F98 000044 (v01 HPQOEM 81A1 01072009 HP 00010013)
ACPI: FIDT 0x000000008C4F6FE0 00009C (v01 HPQOEM 81A1 01072009 HP 00010013)
ACPI: MCFG 0x000000008C4F7080 00003C (v01 HPQOEM 81A1 01072009 HP 00000097)
ACPI: HPET 0x000000008C4F70C0 000038 (v01 HPQOEM 81A1 01072009 HP 0005000B)
ACPI: LPIT 0x000000008C4F70F8 000094 (v01 HPQOEM 81A1 00000000 HP 0000005F)
ACPI: SSDT 0x000000008C4F7190 000248 (v02 HPQOEM 81A1 00000000 ACPI 20120913)
ACPI: SSDT 0x000000008C4F73D8 0011A8 (v02 HPQOEM 81A1 00001000 ACPI 20120913)
ACPI: SSDT 0x000000008C4F8580 0004A3 (v02 HPQOEM 81A1 00001000 ACPI 20120913)
ACPI: DBGP 0x000000008C4F8A28 000034 (v01 HPQOEM 81A1 00000000 HP 0000005F)
ACPI: DBG2 0x000000008C4F8A60 000054 (v00 HPQOEM 81A1 00000000 HP 0000005F)
ACPI: SSDT 0x000000008C4F8AB8 000024 (v02 HPQOEM 81A1 00000000 ACPI 20120913)
ACPI: MSDM 0x000000008C4F8AE0 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00010013)
ACPI: SSDT 0x000000008C4F8B38 00546C (v02 HPQOEM 81A1 00003000 ACPI 20120913)
ACPI: UEFI 0x000000008C4FDFA8 000042 (v01 HPQOEM 81A1 00000000 HP 00000000)
ACPI: SSDT 0x000000008C4FDFF0 000E73 (v02 HPQOEM 81A1 00003000 ACPI 20120913)
ACPI: DMAR 0x000000008C4FEE68 0000A8 (v01 HPQOEM 81A1 00000001 HP 00000001)
ACPI: NHLT 0x000000008C4FEF10 00002D (v00 HPQOEM 81A1 00000002 HP 01000013)
ACPI: TPM2 0x000000008C4FEF40 000034 (v03 HPQOEM 81A1 00000001 HP 00000000)
ACPI: ASF! 0x000000008C4FEF78 0000A5 (v32 HPQOEM 81A1 00000001 HP 000F4240)
ACPI: BGRT 0x000000008C4FF020 000038 (v01 HPQOEM 81A1 01072009 HP 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000026effffff]
NODE_DATA(0) allocated [mem 0x26efd3000-0x26effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000026effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000084371fff]
node 0: [mem 0x000000008439d000-0x000000008b7aefff]
node 0: [mem 0x000000008d2ff000-0x000000008d2fffff]
node 0: [mem 0x0000000100000000-0x000000026effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
On node 0 totalpages: 2074401
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8863 pages used for memmap
DMA32 zone: 567173 pages, LIFO batch:31
Normal zone: 23488 pages used for memmap
Normal zone: 1503232 pages, LIFO batch:31
Reserved but unavailable: 99 pages
Reserving Intel graphics memory at 0x000000008e000000-0x000000008fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x84372000-0x84372fff]
PM: Registered nosave memory: [mem 0x84373000-0x8439cfff]
PM: Registered nosave memory: [mem 0x8b7af000-0x8c4b2fff]
PM: Registered nosave memory: [mem 0x8c4b3000-0x8c4fffff]
PM: Registered nosave memory: [mem 0x8c500000-0x8ce41fff]
PM: Registered nosave memory: [mem 0x8ce42000-0x8d268fff]
PM: Registered nosave memory: [mem 0x8d269000-0x8d2fefff]
PM: Registered nosave memory: [mem 0x8d300000-0x8d3fffff]
PM: Registered nosave memory: [mem 0x8d400000-0x8dffffff]
PM: Registered nosave memory: [mem 0x8e000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2041964
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7892716K/8297604K available (12300K kernel code, 2470K rwdata, 4228K rodata, 2408K init, 2416K bss, 404888K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39092 entries in 153 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 7 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008c255000 end: 0x0000008c274fff
DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Detected 2600.000 MHz processor
tsc: Detected 2592.000 MHz TSC
Calibrating delay loop (skipped), value calculated using timer frequency.. 5184.00 BogoMIPS (lpj=10368000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (20736.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x84372000-0x84372fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8c500000-0x8ce41fff] (9707520 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:16:11, date: 02/08/19
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1549620971.036:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Executed 25 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A4F11800 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A488CC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A4F20300 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A4891600 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A4F13000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A4891200 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E09A4890600 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:13.0: [8086:9d35] type 00 class 0x000000
pci 0000:00:13.0: reg 0x10: [mem 0xdf22f000-0xdf22ffff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf22e000-0xdf22efff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:9d11] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040100
pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:5227] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xdf100000-0xdf100fff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x84372000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8b7af000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8d300000-0x8fffffff]
e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN3206 SYN1e00 SYN0002 PNP0f13 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 45212K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7f335000-0x83335000] (64MB) mapped at [ (ptrval)- (ptrval)]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: AER enabled with IRQ 122
pcieport 0000:00:1c.1: AER enabled with IRQ 123
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.1: Signaling PME with IRQ 123
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x4E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[Firmware Bug]: Invalid critical threshold (0)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (33 C)
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-29deepin-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x406e3, pf=0x80, revision=0xba
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (984781157, 0)->(964887924, 19893233)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: d64bd6be71bc1eefa448ca9d60aedd81597cd233'
Loaded UEFI:db cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-6: new high-speed USB device number 2 using xhci_hcd
evm: HMAC attrs: 0x1
Magic number: 7:354:274
usb usb1-port2: hash matches
tty tty11: hash matches
rtc_cmos 00:01: setting system clock to 2019-02-08 10:16:13 UTC (1549620973)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2408K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1916K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
intel_ish_ipc 0000:00:13.0: enabling device (0000 -> 0002)
rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
usb 1-6: New USB device found, idVendor=064e, idProduct=9314
usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-6: Product: HP Wide Vision FHD Camera
usb 1-6: Manufacturer: SuYin
usb 1-6: SerialNumber: HF2017-T830-SN03-3-REV0100
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usb 1-7: new full-speed USB device number 3 using xhci_hcd
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
clocksource: Switched to clocksource tsc
usb 1-8: new full-speed USB device number 4 using xhci_hcd
usb 1-8: New USB device found, idVendor=04f3, idProduct=2070
usb 1-8: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 1-8: Product: Touchscreen
usb 1-8: Manufacturer: ELAN
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
random: fast init done
ahci 0000:00:17.0: version 3.0
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b180 irq 126
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
psmouse serio1: synaptics: queried max coordinates: x [..5610], y [..4700]
fbcon: inteldrmfb (fb0) is primary device
psmouse serio1: synaptics: queried min coordinates: x [1394..], y [1238..]
psmouse serio1: synaptics: Your touchpad (PNP: SYN3206 SYN1e00 SYN0002 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x12e800/0x0, board id: 2869, fw id: 1953112
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: SanDisk SD8SN8U-256G-1006, X4120006, max UDMA/133
ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SanDisk SD8SN8U- 0006 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 1:0:0:0: [sda] Attached SCSI disk
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[drm] RC6 on
raid6: sse2x1 gen() 10786 MB/s
raid6: sse2x1 xor() 7881 MB/s
raid6: sse2x2 gen() 13338 MB/s
raid6: sse2x2 xor() 9068 MB/s
raid6: sse2x4 gen() 15602 MB/s
raid6: sse2x4 xor() 9523 MB/s
raid6: avx2x1 gen() 21628 MB/s
raid6: avx2x1 xor() 14993 MB/s
raid6: avx2x2 gen() 26114 MB/s
raid6: avx2x2 xor() 16387 MB/s
raid6: avx2x4 gen() 30198 MB/s
raid6: avx2x4 xor() 17648 MB/s
raid6: using algorithm avx2x4 gen() 30198 MB/s
raid6: .... xor() 17648 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on LVM2 metadata daemon socket.
vfs_monitor: loading out-of-tree module taints kernel.
vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
mp: /, major: 8, minor: 6
partition count: 1, comm[333]: systemd-modules, path: /lib/systemd/systemd-modules-load, cmdline: /lib/systemd/systemd-modules-load
EXT4-fs (sda6): re-mounted. Opts: data=ordered
systemd-journald[343]: Received request to flush runtime journal from PID 1
register_kretprobes 10 ok
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd7 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e057 ' to make it known.
Adding 4194300k swap on /swapfile. Priority:-2 extents:9 across:4505596k SSFS
input: HP Wireless hotkeys as /devices/virtual/input/input7
input: Intel Virtual Button driver as /devices/platform/INT33D6:00/input/input8
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
random: crng init done
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20170831/dsopcode-235)
No Local Variables are initialized for Method [HWMC]
Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation)
Arg0: 0000000053e388ef Integer 0000000000000002
Arg1: 0000000036712ea6 Buffer(20) 53 45 43 55 01 00 00 00
ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20170831/dsopcode-235)
No Local Variables are initialized for Method [HWMC]
Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation)
Arg0: 0000000053e388ef Integer 0000000000000002
Arg1: 00000000b28deb55 Buffer(20) 53 45 43 55 01 00 00 00
ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20170831/dsopcode-235)
No Local Variables are initialized for Method [HWMC]
Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation)
Arg0: 0000000053e388ef Integer 0000000000000002
Arg1: 0000000036712ea6 Buffer(20) 53 45 43 55 01 00 00 00
ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
input: HP WMI hotkeys as /devices/virtual/input/input9
ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20170831/dsopcode-235)
No Local Variables are initialized for Method [HWMC]
Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation)
Arg0: 0000000053e388ef Integer 0000000000000002
Arg1: 00000000b28deb55 Buffer(20) 53 45 43 55 01 00 00 00
ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20170831/dsopcode-235)
No Local Variables are initialized for Method [HWMC]
Initialized Arguments for Method [HWMC]: (2 arguments defined for method invocation)
Arg0: 0000000053e388ef Integer 0000000000000003
Arg1: 0000000036712ea6 Buffer(20) 53 45 43 55 01 00 00 00
ACPI Error: Method parse/execution failed \HWMC, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
ACPI Error: Method parse/execution failed \_SB.WMID.WMAA, AE_AML_BUFFER_LIMIT (20170831/psparse-550)
input: PC Speaker as /devices/platform/pcspkr/input/input10
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Error: Driver 'pcspkr' is already registered, aborting...
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
kvm: disabled by bios
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
partition /boot/efi [8, 2] added, comm[502]: mount
snd_hda_codec_conexant hdaudioC0D0: CX20724: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20724: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
iwlwifi 0000:02:00.0: base HW address: a4:02:b9:e1:d3:31
kvm: disabled by bios
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone3: failed to read out thermal zone (-61)
iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
media: Linux media interface: v0.10
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370810011003110e00
Linux video capture interface: v2.00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
input: ELAN Touchscreen Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:2070.0001/input/input18
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:2070.0001/input/input19
input: ELAN Touchscreen Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:2070.0001/input/input22
hid-multitouch 0003:04F3:2070.0001: input,hiddev0,hidraw0: USB HID v1.10 Keyboard [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
uvcvideo: Found UVC 1.00 device HP Wide Vision FHD Camera (064e:9314)
uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
input: HP Wide Vision FHD Camera: HP W as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input24
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
Bluetooth: hci0: Intel firmware patch completed and activated
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
EXT4-fs (sda6): re-mounted. Opts: data=ordered,commit=600
wlo1: authenticate with 54:a6:19:97:78:e0
wlo1: send auth to 54:a6:19:97:78:e0 (try 1/3)
wlo1: authenticated
wlo1: associate with 54:a6:19:97:78:e0 (try 1/3)
wlo1: RX AssocResp from 54:a6:19:97:78:e0 (capab=0x411 status=0 aid=11)
wlo1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
partition /media/hp-spectre/7C6C145F6C14170C [8, 4] added, comm[2892]: mount.ntfs
NET: Registered protocol family 15
Initializing XFRM netlink socket
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.